Dream Vacuum Installation Guide
🏠 Ready to install your Dream Vacuum Central Vacuum System? Follow this easy guide for a cleaner, healthier home!
🔧 Tools & Materials Needed
- Drywall Saw
- Drill + 2-3/8" Hole Saw
- Stud Finder & Level
- Utility Knife & Pipe Cutter
- Wire Stripper & Measuring Tape
- Screwdrivers (Flat & Phillips)
- Safety Goggles
- Low-Voltage Wiring, PVC Cement
- Cable Ties, Duct Tape, Mounting Brackets
- Dream Vacuum System Components
📐 Step-by-Step Installation
1️⃣ Plan Your System
Choose inlet locations (1 per 600–800 sq ft). Plan tubing routes using attics, basements, or crawlspaces. Keep it as direct as possible.
2️⃣ Install the Power Unit
Mount it in a garage or utility room (18" above ground, near outlet). Ensure good ventilation. Plug into a dedicated 120V outlet.
3️⃣ Run Tubing
Measure and cut tubing. Dry-fit before gluing. Use PVC cement sparingly. Support every 4–6 feet with brackets or hangers.
4️⃣ Install Inlet Valves
Cut holes between studs. Mount brackets, run low-voltage wire, and install inlet valves securely with screws.
5️⃣ Connect Low-Voltage Wiring
Run wire alongside tubing. Avoid interference with high-voltage lines. Connect all wires to terminals at the power unit.
6️⃣ Test the System
Power up the unit. Insert hose into each inlet—make sure the suction activates. Listen for leaks and reseal connections if needed.
✨ Optional Features
✅ VacPan: Install a toe-kick dustpan in your kitchen or bathroom—just sweep and push!
✅ Hide-A-Hose: Enjoy a retractable hose system for super clean storage inside your walls.